Setup guide – Salto KS

Background:
Because there are many components in motion, we've compiled a list outlining requirements, clarifications, and areas of responsibility to ensure the seamless integration between Inlet and the lock system.

Read more about the security principals for Inlet and the connections to locks here.

Practical and Technical Requirements:

  1. The SaltoKS system is installed and fully commissioned with the intended access groups in the usual manner by a certified installer.

  2. The locksmith adds Inlet's user in Salto KS (tech@inlet.no) as Site Admin (NOT SITE OWNER) under "Users" on the left side.

  3. Make sure the subscription for the site is active and working (https://app.saltoks.com/site/subscription) 
  4. PS: If you want to use custom pin codes with 4-6 digits, make sure:

    • Buy the Salto KS Pro subscription lisence.

    • Under "Site" -> "Site Oveerview" In the "Settings" box, enable Custom pin for your site.
    • Once all that is done tell our support to enable Custom Pin generation from Inlet.
  5. Inlet needs receive the following to email support@inlet.tech:
    • Customer Name
    • Site name
    • Locks to be added
    • If there are more than one IQ installed, List of which locks are connected to each IQ
  6. Inlet retrieves the IDs of the locks to configure Inlet with the locking system.

  7. Inlet provides information to the top system/booking system that they can test.

  8. Inlet requires at least 2 weeks of testing with the top system/booking system after the installer has completed steps 1-4.